The IP address is used for verities of reasons. Mainly the IP address is necessary to log in to the router, username and password are also necessary with the IP address for login to the router. The IP address 192.168.1.1 is a Private IP address and this is used in the Linksys router. Different networking devices use different private IP address.
However, the public IP address is used on the website. The IP address 192.168.1.1 Login is a default IP address for the Linksys routers. If this is the new device, then the default IP address should be the same but if the device is not new then the IP address can be different. Press the reset button to reset all of the settings.
These 192.168.1.1 or 192.168.0.1 addresses are commonly called host addresses.
For setup anything in the router, you need to log in to the router and use the IP address 192.168.1.1 on the browser adders field and click on the Go button from the browser. Now the login screen page will appear and there you need to use default username and password. You will get those login detail in the router box. Check the router backside to know the IP address, username, and password. You may get those detail on a paper sheet.
192.168.1.1 LOGIN PAGE, USERNAME, PASSWORD
If you want to secure the router, then you need to change the default username and password. If you use the default username and password on the device, then it is very easy to log into the router by anyone. That is why it is necessary to change the default login detail. If you change the default username and password, then no one can access your router from your home or office. Now your router is enough secured.
If you want to remove the settings, then you can press a reset button. Now, setup the internet is very easy on the router. You have to use your ISP information to set up the internet connection. Your ISP must give all necessary data for setup internet. If you want to setup internet of a dial-up connection, then you have to use username and password in the router of dial-up. It is better if you use Wizard tool for quick setup of internet connection in the router. Advanced users can setup the internet connection manually.
There are different types of settings available in the router control center for Wi-Fi security. Changing the default SSID network name is the main thing, and this is mainly used to identify the network connection. For the security of the Wi-Fi, you should give a unique name to the SSID network name. You should not use family members name as the SSID network name.
So, the people cannot identify your Wi-Fi connection until you disclose it and the connection remains safe. You should hide the SSID network name if your router supports that. By hiding the SSID network name, you will get more security. Read the router manual to know the detail process of hiding the SSID network name. Generally it is as company name or brand name of your router using which you will login to 192.168.1.1 ip.
Note that the default username and password for general 192.168.1.1 routers are:
- Username: admin
- Password: admin
- Username: admin
- Password: password
Encrypted security is not a new thing and developer always update the feature for better security. Encrypted security is WPA2 and PSK. Those are running mostly on all of the devices now a day. You should enable WPA2 and PSK for the Wi-Fi security. You should use updated encrypted security always. You need to apply a hard password for WPA2 and PSK encrypted security to make the Wi-Fi safer. Read the manual of the router to know more about the security if you want to understand all features of encrypted security.
For the Wi-Fi connection, you should use a hard password. You need to use a critical password for Wi-Fi connection safer. The hard password for Wi-Fi is very important. You can use a tool for creating a password. You can create a difficult password for the Wi-Fi connection. You can create the password by yourself with letters, numbers and symbols combination. For building a hard password, you need to use upper and small case letters in the password. The password will be 11 digits long at least.
Mac filtering is a very important option for filtering the MAC ID for the router. With this feature, you can build a safe list of devices which are allowed to use a Wi-Fi connection. You can add and remove MAC ID anytime from the list. You should update the firmware for making the secure connection and the device.
HOW TO FIND ROUTER IP ADDRESS
If you want to set up a new Router or configure your Network, then you will need a Router IP Address so that you can access it and log in to your Router to change settings. Now how to find Router IP address to log in. Here are some default IP addresses 192.168.0.1, 10.0.0.0.1 or 192.168.2.1. Check the below links to find more Router IP address.
HOW TO CHANGE 192.16811 ROUTER PASSWORD
If you want to change Router Password then you can. All you need to do is, access Router admin page > go to advanced settings > Router Admin > Change Password > Enter Old and New Password and save. Done!
192.168.1.1 ROUTER IP ADDRESS
You can log in to your Router with their default IP address but note that each Router has its Default IP address. So here we are going to share a list of all the 192.168.1. Router IP address and default Username and password.
ROUTER IP ADDRESS, DEFAULT USERNAME, AND PASSWORD:
|Router Manufacturer||IP address||User Name||Password|
HOW TO ACCESS CISCO ROUTER USING 192.168.1.1
Step 1: Connect your Cisco Router to PC using RJ45 cable.
Step 2: Turn on Router and PC.
Step 3: Open Browser and type 192.168.1.1 and press Enter.
Step 4: Enter Default username and password (admin-admin) if you haven’t changed. Or Enter your username and password.
Step 5: This will open the Cisco Router Admin Page. Now you can customize all your settings and also change WiFi password.
D-LINK ROUTER LOGIN USING 192.168.1.1
Step 1: Plug D-Link router with your laptop or desktop with Ethernet cable.
Step 2: Turn on your computer.
Step 3: Open Web browser. Type http://192.168.1.1 or http://dlinkrouter > Enter.
Step 4: Log in to the D-Link router with the administrator username and password.
Step 5: If you are a login into for the first time then click on Setup and then go to wireless settings. You can setup it manually or automatically.
HOW TO LOG IN TO A NETGEAR ROUTER USING 192.168.1.1
Step 1: First of all, connect Netgear router with your Windows PC and then open Browser and type 192.168.1.1 > Enter.
Step 2: Enter Router’s default username and password. If you don’t know default username-password then check our above table. Go to Wireless Settings and customize settings.
TP-LINK ROUTER, LOGIN & IP USING 192.168.1.1
Step 1: TP-LINK Router has an IP address 192.168.1.1. Connect Router and PC with the RJ45 cable.
Step 2: Type 192.168.1.1 in browser > Enter.
Step 3: Enter username and password.
- IP address: 192.168.1.1 (or http://tplinkwifi.net)
- Username: admin
- Password: admin/password
Step 4: Go to Wireless Setting and change settings that you want.
If you are facing issue while connecting Router and accessing 192.168.1.1 admin page, then you may have done something wrong. These are some possible mistakes.
- The IP address is configured improperly.
- The Incorrect IP address is used in the browser or wrong settings are set up.
- The router may not reply for the damaged connection with the modem
- The wrong proxy is installed in the browser. Now reconfigure the proxy properly.
- The wrong or faulty formed IP address is used like 192.168.I.I instead of 192.168.1.1.
- The IP address is used as link www.192.168.1.1
Read the manual to know about the Wi-Fi and router settings. You can contact the manufacturer site to know about the settings, or you can ask for the help from the router manufacturer. This is a very fast and easy process to know everything about the routers and Wi-Fi setting.
HOW TO CONNECT TWO ROUTERS HAVING THE SAME IP ADDRESS
Step 1: Connet one of the Router with PC using LAN cable and then go to https://192.168.0.1 or www.192.168.1.1 address > Enter username and password > Access Admin page.
Step 2: Go to Network or LAN Setup and change the IP address to 192.168.2.1 and save.
In my case, i am using NetGear Router, then go to Advanced > Setup > LAN Setup an IP address > change IP and Apply.
Step 3: Now Connect both the Router with LAN cable and you will see they are working fine.
Some new Routers have auto setup mode. They allow users to configure it but if the user doesn’t want to Setup a new Router then they automatically setup it for the user. They find Default Router Login IP address and Password for you.
If you are still facing issues while accessing 192.168.1.1 admin Login page, then comment below.